Transmitter Parts
06) REMOVABLE GRID Allows access to the transducer capsule;
07) DIGITAL DISPLAY Shows the frequency being used, battery status;
08) IR PORT Infrared port for the Wireless Infrared Auto Sync Technology system. It allows receiving the
frequency defined in the receiver in order to synchronize it to the transmitter stick;
09) POWER BUTTON Turns the stick on and off, cutting communication to the receiver;
10) BATTERY COMPARTMENT - houses 2 AA 1.5V batteries or 2 AA 1.2V rechargeable batteries;
Information on Transmitter Display
03) TRANSMISSION FREQUENCY
04) BATTERY LEVEL INDICATION
Transmitter battery replacement
Two new alkaline batteries have the charge for up to 8
hours of equipment use. When the battery indicator is
empty and flashes (see below), you should
replace both batteries at once, as showed in the image.
Rechargeable batteries present a shorter duration time (depending on their useful life).
The receiver is a stationery equipment. It operates within a UHF bandwidth between 640.000 MHz and 664.750 MHz
and offers up to 100 different carrier frequencies through its channels. It has 2 articulated removable antennas,
adjustment of volume gain, manual or automatic frequency selection with an AUTOSCAN feature, and frequency
18
RECEIVER
WP-300