Suzuki 95400-4885 Serie Instrucciones Para El Montaje página 11

4. Raise the handle (D), set the
slider (C) in locked position.
5. Shake the side case for check-
ing the secure fitment of it into
the side case bracket.
WARNING
When the Side Case is locked
completely, the red labels on
the slider (C) and the handle
(D) are not visible. Confirm
this condition surely.
If the side cases are installed
incorrectly, it may cause a
serious accident as a fall.
6. Check the buckle (B) and the
handle (D) set in closed posi-
tion.
Turn the key to locked position
and remove it from the key cyl-
inder.
NOTICE
To set the handle (D) to closed
position, the slider (C) has to
be set in "Locked position"
firstly.
GENUINE SUZUKI ACCESSORIES
(D)
(C)
(B)
(D)
(C)
11/14