6/14
4. Set the Side Case 1 as follow-
ings.
• Set the lid (A) and the buckle
• Set the slider (C) at locked
• Set the handle (D) at closed
When the Side Case is locked
completely, the red labels on the
slider (C) and the handle (D) are
not visible.
5. Turn the key to counterclock-
wise and install the key cylinder
into the Side Case by fitting a
ditch of the Side Case 1 and a
projection of the key cylinder as
shown.
• Left and Right side of the
Key Cylinder have a different
shape.
Confirm the direction of it,
before putting it into the side
case.
• When the key is not turned
smoothly, do not install the
key cylinder into the side
case to prevent from not
removing of a key from the
key cylinder.
• Please check the key cylin-
der is installed securely to
the Side Case 1.
GENUINE SUZUKI ACCESSORIES
(B) at closed position
position
position
NOTE
NOTICE
(D)
(B)
(C)
(A)