When Using A Display Connected To V Out; To Avoid Battery Exhaustion; Rear View Camera; Handling The Sd Card Slot - Pioneer AVH-X8850BT Manual De Instrucciones

Precaution
When using a display con-
nected to V OUT
The video output terminal (V OUT) is for connection of a display
to enable passengers in the rear seats to watch video images.
WARNING
NEVER install the rear display in a location that enables the
driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using
this product without running the engine can drain the battery.
WARNING
Do not install this product in a vehicle that does not have an
ACC wire or circuitry available.

Rear view camera

With an optional rear view camera, you are able to use this
product as an aid to keep an eye on trailers, or backing into a
tight parking spot.
WARNING
 SCREEN IMAGE MAY APPEAR REVERSED.

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE
REAR VIEW CAMERA. OTHER USE MAY RESULT IN
INJURY OR DAMAGE.
CAUTION
 For safety reasons, the rear view camera function is not
available until this product boots up completely.

The rear view mode is to use this product as an aid to keep
an eye on the trailers, or while backing up. Do not use this
function for entertainment purposes.

Handling the SD card slot

CAUTION
 Keep the SD memory card out of the reach of small
children to prevent them from accidentally swallowing it.

To prevent data loss and damage to the storage device,
never remove it from this product while data is being
transferred.
 If data loss or corruption occurs on the storage device for
any reason, it is usually not possible to recover the data.
Pioneer accepts no liability for damages, costs or expenses
arising from data loss or corruption.
 Never insert or eject an SD memory card while driving.

Handling the USB connector

 To prevent data loss and damage to the storage device,
never remove it from this product while data is being
transferred.

Pioneer cannot guarantee compatibility with all USB mass
storage devices and assumes no responsibility for any loss
of data on media players, iPhone, smartphone, or other
devices while using this product.

Visit our website

Visit us at the following site:
In Mexico
http://www.pioneer-mexico.com/
In Singapore
http://www.pioneer.com.sg/
In Malaysia
http://www.pioneer.my/
In Thailand
http://www.pioneer-thailand.com/
In Philippines
http://www.pioneer.ph/
In Vietnam
http://www.pioneer.vn/
In Indonesia
http://www.pioneer.co.id/
In Australia
http://www.pioneer.com.au/
In Israel
http://www.pioneerisrael.co.il/
In Middle East / Africa
http://www.pioneer-mea.com/en/
In Latin
http://www.pioneer-latin.com/en/about-pioneer.html
In Hong Kong
http://www.pioneerhongkong.com.hk/ct/index.php
In Taiwan
http://www.pioneer-twn.com.tw/
In Korea
http://www.pioneer.co.kr/
 We offer the latest information about PIONEER
CORPORATION on our website.
 Pioneer regularly provides software updates to further
improve it's products. Please check the support section of
the Pioneer website for all available software updates.
Protecting the LCD panel and
screen
 Do not expose the LCD screen to direct sunlight when this
product is not used. This may result in LCD screen malfunc-
tion due to the resulting high temperatures.
 When using a mobile phone, keep the aerial of the mobile
phone away from the LCD screen to prevent disruption of the
video in the form of spots, coloured stripes, etc.
 To protect the LCD screen from damage, be sure to touch the
touch panel keys only with your finger and do so gently.

Notes on internal memory

Before removing the vehicle battery
If the battery is disconnected or discharged, the memory will be
erased and must be reprogrammed.

Some of the settings and recorded contents will not be reset.
Data subject to erasure
The information is erased by disconnecting the yellow lead from
the battery (or removing the battery itself).
 Some of the settings and recorded contents will not be reset.
Resetting the microprocessor
CAUTION
Pressing the RESET button resets settings and recorded
contents to the factory settings.
— Do not perform this operation when a device is connected
to this product.
— Some of the settings and recorded contents will not be
reset.
The microprocessor must be reset under the following
conditions:
 Prior to using this product for the first time after installation.
 If this product fails to operate properly.
 If there appears to be problems with the operation of the
system.

If your vehicle position is shown on the map with a signifi-
cant positioning error.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen tip or other
pointed implement.
5