Radio; Starting Procedure; Storing The Strongest Broadcast Frequencies; Searching By Pty Information - Pioneer AVH-X8850BT Manual De Instrucciones

Radio

Displays the preset channel list.
Select an item on the list ( "1" to "6" ) to
switch to the preset channel.
Selects the FM1, FM2, FM3
or AM band.
Performs manual tuning.
Performs seek tuning or
HOLD
non stop seek tuning.
Releasing the key in a few seconds, skips to
the nearest station from the current
frequency.
Keeping holding the key for a long seconds,
performs non stop seek tuning.
Recalls the preset channel
stored to a key from memory.
Stores the current broadcast
HOLD
frequency to a key.
Searches for a broadcast by PTY information.
 Refer to Searching by PTY information on page
19
p By pressing the or button, you can also switch
the preset channels.
p By pressing and holding the or
release, you can also perform seek tuning.

Starting procedure

1 Display the AV source selection screen.
2 Touch [Radio].
Storing the strongest broadcast
frequencies
The BSM (best stations memory) function automatically stores
the six strongest broadcast frequencies under the preset tuning
keys "1" to "6".
p Storing broadcast frequencies with BSM may replace those
you have already saved.
p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the
limit.
1 Touch the preset channel list display key.
2 Touch to begin a search.
The six strongest broadcast frequencies will be stored under the
preset tuning keys in the order of their signal strength.
 Touch [Cancel] to cancel the storage process.

Searching by PTY information

You can tune into a station using PTY (Program Type
Identification) information.
The default setting is "News&Info".
p This function is available only when you receive the FM band.
1 Touch .
2 Touch or
The following items are available:
News&Info, Popular, Classics, Others.
3 Touch to begin a search.
 Touch [Cancel] to cancel the searching process.
button and
to select the item.
Displaying the "Radio settings"
screen
1 Display the "System" setting screen.
2 Touch [AV Source Settings].
3 Touch [Radio Settings].
Tuning into strong frequencies
Local seek tuning allows you to only tune into those radio sta-
tions with sufficiently strong signals.
The default setting is "Off".
p This setting is available only when "Radio" is selected as the
source.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [Local].
3 Touch the item.
 Off:
Turns the seek tuning setting off.
 Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for
AM Level1 or Level2).
p The FM "Level4" (AM "Level2") setting allows you to receive
the only stations with the strongest signals.
Setting the FM or AM tuning step
You can switch the seek tuning step for the FM band, and the
seek/manual tuning step for the AM band.
p This setting is available when the source is turned off.
p For the FM band, the manual tuning step is fixed to 50 kHz.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [FM Step] or [AM Step] to switch the
tuning step.
The following items are available:
FM Step
 100kHz (default)
 50kHz
19