Limiting Stations To Regional Programing; Digital Tv - Pioneer AVH-X8850BT Manual De Instrucciones

Radio
AM Step

9kHz (default)

10kHz
Setting the alternative frequency
search
When the tuner cannot get a good reception, tunes to another
broadcast station that supports the same programme in the
current network.
The default setting is "Off".
p This function is available only when you receive the FM band.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [Alternative FREQ] to switch "On" or
"Off".
Setting the Auto PI search
When you switch to the broadcast station containing RDS data,
searches for the same PI (Program Identification) code broad-
cast station from all frequency band automatically.
The default setting is "Off".
p This setting is available when the source is turned off.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [Auto PI] to switch "On" or "Off".
Limiting stations to regional
programing
You can switch whether the area code is checked during the
Auto PI search.
The default setting is "On".
p This function is available only when you receive the FM band.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [Regional] to switch "On" or "Off".
20
Receiving traffic announcements (TA)
The traffic announcement can be received from the last selected
frequency, interrupting the other sources.
The default setting is "Off".
p This function is available only when you receive the FM band.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [TA Interrupt] to switch "On" or "Off".
Receiving news announcements
The news can be received from the last selected frequency,
interrupting the other sources.
The default setting is "Off".
p This function is available only when you receive the FM band.
1 Display the "Radio Settings" screen.
 Refer to Displaying the "Radio settings" screen on page 19
2 Touch [News Interrupt] to switch "On" or "Off".

Digital TV

Hides the tuner control keys.
To display again the keys, touch
anywhere on the screen.
Switches the preset
channels upward or
downward.
Displays the TV tuner menu.
Recalls the preset channel.
Displays the Electronic Programme Guide (EPG).
 Refer to Receiving the programme information on
page 21
You can control a TV tuner, such as GEX-1550DTV (sold
separately).
 For details, refer to the TV tuner's operation manual.
p By pressing the or button, you can also switch
the preset channels.
p You can set the screen size for the video image.
 Refer to Changing the wide screen mode on page 48
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the handbrake.