To eliminate the risk of burns
or fire by reaching over
heated surface units, cabinet
storage space located above
the surface units should be
avoided. If cabinet storage
is to be provided, the risk
can be reduced by installing
a range hood that projects
horizontally a minimum of
5" beyond the bottom of the
cabinets.
Cabinet and countertop dimensions
* «
Check for wall and cabinet clearances where the range will be installed.
* «
Check the stability of the floor where the range will be installed.
*
Check for proper electrical and gas supply.
Note: All dimensions provided are minimal unless otherwise stated.
Ae
13"
Mou
we
Maximum
height from
Minimum on
depth for cabinets
cooktop
either side of
above ramge top
to cabinets,
range
ee
30"
r Gabinet
—
ening
ae
|
idth?
|
Fig. A
2-1/4"
NY
Back Wall
ta
Install a flush mount
240V 40/50 ampere
electrical wall outlet
in the shaded area.
*
If cabinet depth is greater than 25", the oven front
frame must extend beyond cabinet front by 1/2"
minimum.
All openings in the wall or floor where the range is
to be installed must be sealed.
Note: The gas supply pipe stube and elbow assembly
centerline should not exceed 4" height form the floor.