7 4.2 Setting the date and time -
1. After the new batteries are activated, the year number flashes
button. To confirm and then set the month, press the time button;
2'. You can now set themonth using the "M" button. To confirm
_ and then set the day, press the time button.
minutes.
4. Once you have set the last minute and pressed the time bUt-
ton, the date and time are set and the time is displayed.
.5. If you want to change the date and time, press and hold the :
time button down for approx, 3 seconds until the year number
starts to flash. Now you can enter the new values as described
above.
4.3. Cuff tube connection
indicated by the drawing of a cuff.
'
"
Button
1
5'?
Button