RiteAid deluxe automatic Manual De Instrucciones página 20

This instrument allows you to set two alarm times at which an
instance as a reminder to take medication or to remind you to take, .
your blood pressure at the same time each day.
1. To set an alarm time, press the time button (the instrument must
the "M" button and hold both down untilthe bell symbol appears
in the bottom left of the display. Then release both buttons. The
flashing "1" in the display indicate-s that the first alarm time can
2. Press the time button to set'th'e hours -theth'o'urs' dis-play flash— . ;
es and pressing the "M" button allows you to set *the alarm hour. '
To confirm, press the time button.
the "M" button. To confirm press the time button again.
4. The bell symbol will now flash. Use the "M" button to select
whether the alarm time is to be active lbelllgor inactive (crossed-
To set-a7 second alarm time, proceed as above but if the "l " flashes,
press the "M" button to select "2" and confirm with the time button.
0 An active alarm time is indicated by the bell symbol In the display.
0 The alarm sounds at the set time every day.
START/STOP button.
0 To permanently switch-off the alarm, proceed as above (steps 1- .
pear from the display.
II\_.\