Publicidad
Idiomas disponibles
Idiomas disponibles
5.6. Memory — Displaying the last 99 Measurements
At the end of a measurement, this monitor automatically stores
each result with date and time. Thisunit stores 99 memories.
Viewing the stored values
then shows an average of all measurements stored in the unit.
Pressing the "M" button again displays the previous value. To view
a particular stored memory press and hold the "M" button to scroll
to that stored reading
-
Clear all values
If you are sure that you want to permanently remove all" stored Val— . . '
sues, hold down the "M" button (the instrument must have been
button. If you do not want to clear the values, press the '
'
START/STOP button; To permanently clear the memory, pressthe
5.7. Discontinuing a Measurement
If it is necessary to interrupt a blood pressure measurement for any '
reason (e. g the patient feels unwell), the START/STOP button can
be pressed at any time. The device then immediately lowers the -
cuff pressure automatically.
17:
Publicidad
