Balluff BMP 02-P A-P Serie Manual De Instrucciones página 57

BMP 02- _ P _ _ _ _ _ A- _ _ _ _ - _ _ -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
12
Type code
Interface, analog:
Z = no analog output
A = Voltage output 0...10 V
Configuration interface:
P = IO-Link interface (parameterization) + signal output
Resolution interface, analog:
Z = not relevant
1 = 12 Bit
Interface, switching function:
PP = Switching output: PNP, NO/NC programmable
NP = Switching output: NPN, NO/NC programmable
Output characteristic:
2 = rising (factory setting), programmable
3 = falling (factory setting), programmable
Output:
2 = 2 programmable switching outputs
Output configuration:
A = Characteristic and switch points adjustable using Teach In or IO-Link
Measurement range (4-digit):
0128 = Metric specification in mm, measuring range 22 mm
Type of mounting:
06 = T-slot
07 = C-slot
Electrical connection:
P02 = PUR/TPU cable, 2 m
P05 = PUR/TPU cable, 5 m
P00,3-S4 = PUR/TPU cable, 0.3 m with M12 male, 4-pin
P00,3-S75 = PUR/TPU cable, 0.3 m with M8 male, 4-pin
www.balluff.com
BMP 02-AP1PP21A-0128-06-P00,3-S75
english 27