Publicidad
Idiomas disponibles
Idiomas disponibles
TURNING SCALE ON/OFF
1.
Press the ON button to turn the scale on. Proceed
with weighing the items once 0.0 lb. appears on
display. (See Figure 2)
Figure 2
ON
Push Button
NOTE: Always wait for display to return to zero
before weighing new items.
2. Press the OFF button to turn the scale off.
CHANGE UNITS OF MEASURE
1.
Press the lb./kg. button to switch between lb. and kg.
(See Figure 3)
.
Figure 3
0
0
.
lb
kg
ZERO
1.
Press the ZERO button to return the scale to 0.0.
(See Figure 4)
Figure 4
0
ZERO/
HOLD
Push Button
Display goes to
HOLD
Keeps current product weight on display after product is
removed.
1.
Press the ZERO button for 3 seconds to activate
"Hold". Press the ZERO button for another 3 seconds
to deactivate "Hold".
PAGE 2 OF 9
0
/
.
4010
4040
Display goes to
Display goes to
0
.
.
lb
.
kg
Push Button
Display goes to
.
0
4
.
lb
.
kg
Add net
weight
Display goes to
OPERATION
TARE
1.
Place a container on the scale.
2. Press the ZERO button to tare the container weight.
Press the ZERO button again every time a new item
is added to the container. (See Figure 5)
.
0
lb
.
kg
Figure 5
AUTO SHUT-OFF
Scale will automatically turn off after approximately
two minutes of inactivity.
To cancel auto shut-off, while scale is off, press and hold
.
0
.
lb
the lb./kg. button. While still holding lb./kg. button, press
.
kg
the ON button until "A_Of" is displayed. The scale will
remain on until manually turned off.
To reactivate auto shut-off, turn scale off and on again.
CALIBRATION
1.
Plug AC adapter into outlet. Turn scale off.
2. Press the ZERO, lb./kg. and ON buttons at the same
time. Release after the scale turns on and LCD
.
0
.
displays "4010/4040" –' "CAL" –' "U 07."
lb
.
kg
3. The scale then shows a value between "700F~9F00."
The value should be hexadecimal.
4. Press the ZERO button, LCD displays "C100/C200" –'
"0." See table for appropriate weights.
ULINE MODEL #
Calibration Weights
5. Add weight to the scale. LCD displays a value
between "90F~2FF0/1F00~4F00." The value should
be hexadecimal.
6. Press the ZERO button, then LCD displays "End" and
turns off.
0
0
.
ZERO/
HOLD
Push Button
Display goes to
H-480
100 lb.
.
.
4
0
.
lb
lb
.
.
kg
kg
Add net
weight
Display goes to
H-479
200 lb.
0424 IH-479
Publicidad
