Publicidad
Using the Boost function
Activate the boost function
Touching the max button. Make sure the
display shows the marquee action.
Cancel the Boost function
Touching the heating zone slider control that you
wish to cancel the boost function.
• The function can work in any cooking zone.
• The cooking zone returns to its original setting after 10 minutes.
• If the original heat setting equals 0, it will return to max digital level after 10 minutes.
• If the LF hob is set to boost and then the LR hob is set to boost, the LF LR is set to 15 level.
Intensive ventilation setting
• The ventilation system has intensive modes. If you activate the intensive settings, the ventilation system works
at maximum output.
• Activating the intensive ventilation setting.
1. Touch
.
2. Display "b" on the digital tube.
• Changing or deactivating the intensive ventilation setting.
• Using
key to select the required performance level in the settings area or set it to 0.
Automatic start for the ventilation system
If you select a power level for a cooking zone and the automatic start switches on.
The ventilation system switches on at a power level in accordance with the respective power level for the cooking
zones.
Flexible Area
• This area can be used as a single zone or as two different zones, accordingly to the cooking needs anytime.
• Flexible area is made of two independent inductors that can be controlled separately. When working as a single
zone, the part that is not covered by cookware is automatically switched off after 8 secons.
• To grant a correct pan detection and a even heat distribution, the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the cookware is smaller than 21 cm.
- Anywhere with bigger cookware.
Turn the whole cooktop off by touching the ON/
OFF control.
57
V.1
Publicidad
