Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

EN
Product description and accessories
Touch panel
Microphone
L
Note:
• Images are for illustrative purposes only and may differ from the actual product.
• For the need of technical improvement and system upgrade, information and specifications contained
herein may be slightly different from actual product. If any difference is found, the actual product prevails.
Operating instructions
■ Power on
Take out the earbuds, or press and hold the touch panel for 3s.
■ Power off
Place the earbuds in the charging case, or press and hold the touch
panel for 5s.
■ Battery level status
Low battery
0%~33%
33%~67%
67%~100%
■ Charge
• Earbuds
1. Place the earbuds in the case for charging.
2. After the battery level indicator on the case is lit, the lightbar will
blink slowly:
Indicator at the bottom blinking slowly = charging (Left earbud)
Indicator at the top blinking slowly = charging (Right earbud)
Indicators off = fully charged
• Charging case
Ice blue/purple indicator blinking slowly = charging; Indicator steady lit for 3s and then off = fully charged;
It takes around 2 hours for a full charge.
0%~33%
33%~67%
67%~100%
■ Connection method
• Bluetooth
1. When powered on for the first time, the earbuds will auto-enter Bluetooth pairing state (prompt: "Bluetooth
Pairing").
2. Select "HECATE GT2" in your device setting to connect. You will hear the prompt "Bluetooth Connected"
when successful.
3. For a device paired successfully before, the earbuds will reconnect to it automatically. If not, the eabuds will
auto-enter the pairing state in 3 seconds.
■ Controls
Touch panel
Accept/end a call
Reject a call
Enable voice assistant
(Left earbud)
Switch game/music mode
(Right earbud)
Model: EDF700056
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
©2024 Edifier International Limited. All rights reserved.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO., LTD.
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be
subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown
on this manual may be slightly different from actual product. If any difference is found, the actual
product prevails.
TRU E W IRELE S S GA MING EA RBUDS
Quick Start Guide
Touch panel
Microphone
R
Quick start guide
Indicator at the bottom blinks rapidly.
Indicator at the bottom is steady lit;
Indicators at the top and in the middle are off.
Indicators at the bottom and in the middle are steady lit;
Indicator at the top is off.
Three indicators are steady lit.
Indicator at the bottom blinks slowly.
Indicator at the bottom is steady lit;
Indicator in the middle blinks slowly.
Indicators at the bottom and in the middle are steady lit;
Indicator at the top blinks slowly.
L
For more information, please visit our website:
Brand card
R
X2
X2
2s
2s
X3
2s
X3
L
R
Touch panel
Play/pause
Previous track(Left earbud)
Next track(Right earbud)
Indicator
Brand sticker
•Power on
3s
•Power off
5s
Indicator at the
top
Indicator at the
bottom

Publicidad

loading

Resumen de contenidos para EDIFIER HECATE GT2

  • Página 1 1. When powered on for the first time, the earbuds will auto-enter Bluetooth pairing state (prompt: "Bluetooth Pairing"). 2. Select "HECATE GT2" in your device setting to connect. You will hear the prompt "Bluetooth Connected" when successful. 3. For a device paired successfully before, the earbuds will reconnect to it automatically. If not, the eabuds will auto-enter the pairing state in 3 seconds.
  • Página 2 1. Cuando se enciendan por primera vez, los auriculares entrarán de modo automático en estado de emparejamiento (aviso: "Bluetooth Pairing"). 2. Seleccione "HECATE GT2" en la configuración de su dispositivo para conectar. Escuchará el aviso "Bluetooth Connected" cuando sea correcto.
  • Página 3 1. Quando ligados pela primeira vez, os fones de ouvido entrarão automaticamente no estado de pareamento Bluetooth (aviso: "Bluetooth Pairing"). 2. Selecione "HECATE GT2" na configuração do seu dispositivo para conectar. Você irá ouvir o aviso "Bluetooth Connected" quando a conexão for feita.

Este manual también es adecuado para:

Hecate edf700056