Publicidad
Adjusting speaker output level
Ajuste del nivel de salida de los altavoces
In order to reproduce the movement of the sound and its clear
orientation, it is important to adjust the output level of each speaker.
Adjust output to the correct levels while listening to the test signal.
Before starting, check your front speakers are correctly balanced
(see page 58),
1
Press 00 PRO LOGIC to select "SURROUND"
or
"3 STEREO".
2
Press TEST to output a test signal.
The test signal is emitted in the following order:
For SURROUND mode
Front speaker (left) Center speaker
t
Surround speakers (left, right)<—Front speaker (right)
The test signal is not emitted from the center speaker when the
center mode is on PHANTOM.
For 3 STEREO mode
Front speaker (left) Center speaker
Front speaker (right)
Output levels can be varied within a range of +12 dB with front
speaker output level serving as the zero point.
©The test signal is output only by the speaker you are now adjusting
and does not repeat the sequence until adjustments are complete.
Remember you cannot adjust output level of the surround speakers
if you selected the 3 STEREO mode in step 1.
—_——
To stop the test signal:
Press TEST.
Para el modo 3 STEREO
Altavoz delantero (izquierdo)— Altavoz central
t
esl
Altavoz delantero (derecho)
Para detener la sefial de prueba:
Pulse TEST.
Publicidad
