Installation
Installation
Installation
Installation
Installation
Make sure that the cooker hood is disconnected fr
Make sur
Make sur
Make sur
Make sur
e that the cooker hood is disconnected fr
e that the cooker hood is disconnected fr
e that the cooker hood is disconnected from the power supply befor
e that the cooker hood is disconnected fr
carrying out the installation.
carrying out the installation.
carrying out the installation.
carrying out the installation.
carrying out the installation.
The hood is supplied with halogen
bulbs, above and below. Foresee
sufficient space between the hood and
the kitchen furniture in order to avoid
the bulbs and the furniture panels
overheating.
Also leave sufficient space to allow
opening and removing the front panels.
• Remove the front panels and the
grease filters (see corresponding
paragraphs).
• Mark a central line on the wall to
facilitate the installation procedure.
Position the drilling template so that
the line printed in the middle
corresponds to the central line
marked previously, and so that the
lower side of the template
corresponds to the lower part of the
cooker hood once it has been fitted.
• Make 4 holes as indicated, fit 4 rawl
plugs into them and fix the bracket in
place using 2 screws.
electrolux
electrolux installation
electrolux
electrolux
electrolux
om the power supply before e e e e
om the power supply befor
om the power supply befor
om the power supply befor
If you wish to install the telescopic flue
(sold separately as a special accessory,
see chapter entitled "Special
accessories"), read the instructions
supplied with the telescopic flue
beforehand.
Ø 8mm
19
19
19
19
19
GB
Ø 8mm
Ø 5x45