Descargar Imprimir esta página

Xylem FLOJET N51 0 Serie Instalación Y Operación página 2

Bomba neumática industrial

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
PRODUCT DATA
Pump Design
Wetted Parts
Diaphragm Material
Check Valve Material
Housing Material
Ports
Net Weight
® A registered trade mark of Celanese Corporation
® A registered trade mark of I.E. DuPont Co.
DESCRIPTION
FLOJET Industrial N51X0 Series Pumps are designed for light
general commercial and industrial applications. These pumps are
constructed from a selection of materials for handling a broad
range of chemicals*.
NOTE: Not to be used with any Fluids with a flash point below
100°F (37.8°C).
* For Chemical Compatibility of diaphragm material please refer to the
Chemical Compatibility Guide referenced in F100-227.
DIMENSIONAL DRAWING
Inches (millimeters)
DESSIN À L'ÉCHELLE Pouces (millimètres) / MAßZEICHNUNG Zoll (Millimeter) / DISEGNO DIMENSIONALE Pollici (millimetri) / MAATTEKENING Inch (millimeter) /
DIMENSIONELL RITNING Tum (millimeter) / DIBUJO DIMENSIONAL Pulgadas (milímetros)
1.98
(50)
MODEL : N51X0XXX
CO2 OR DRY COMPRESSED AIR OPERATED
OPERATING PRESSURE 20 TO 80 PSI
Tolérances dimensionnelles ± 0,06 pouces. Consulter l'usine si des détails précis sont requis.
Maßtoleranzen ± 0,06 Zoll. Wenden Sie sich an das Werk, wenn genaue Angaben erforderlich sind.
Tolleranze dimensionali ± 0,06 pollici. Consultare la fabbrica se sono richiesti dettagli precisi.
Maattoleranties ± 0,06 inch. Raadpleeg de fabriek als nauwkeurige details vereist zijn.
Dimensionella toleranser ± 0,06 tum. Kontakta fabriken om exakta detaljer krävs.
Tolerancias dimensionales ± 0.06 pulgadas. Consulte con la fábrica si se requieren detalles precisos.
Double Diaphragm
Santoprene® or Viton®
Santoprene® or Viton®
Acetal Copolymer or Polypropylene
Air Inlet & Outlet 1/4" (6.3 mm) Barb
Product Inlet 3/8" (9.5 mm) Barb
Product Outlet 3/8" (9.5 mm) Barb
)
1.10 lb. (0.5 Kg
6.18
(157)
2.22
(56)
STANDARD MODELS
N5100020 ..........Viton® & Acetal Copolymer Body
N5100040 ..........Santoprene® & Acetal Copolymer Body
N5110040 ..........Santoprene® & Polypropylene Body
PERFORMANCE SPECIFICATIONS
PUMP
Liquid temperature
Priming
Flow Rates
Air Supply Pressure
Noise Level
80
(5.5)
70
(4.8)
60
(4.1)
50
(3.4)
40
(2.8)
30
(2.1)
20
(1.4)
10
(0.7)
0
0
0.2
(0.8)
NOTE: For maximum running life do not exceed 80 PSI (5.5 Bar)
air inlet pressure or 20 PSI (1.4 Bar) differential air pressure.
2.42
(61)
N5100XXX
4.14
2.89
(105)
(74)
0.77
(19)
2
MIN............................................40°F (4°C)
MAX......................................120°F (49°C)
DRY.........................26.2 Ft (8 m) of water
WET........................29.5 Ft (9 m) of water
MAX..................up to 2.0 GPM (7.6 LPM)
20 to 80 PSI (1.4 to 5.6 Bar)
MAX....................................................87dB
80*
60*
40*
0.4
0.6
0.8
1.0
1.2
(1.5)
(2.3)
(3.0)
(3.8)
(4.5)
Flow in GPM (LPM)
*Indicates Air Inlet Pressure in PSI
2.89
(74)
N5110XXX
1.00
1.00
(25)
(25)
1.4
1.6
1.8
2.0
(5.3)
(6.1)
(6.8)
(7.6)
0.1
(2)
4.00
(102)

Publicidad

loading

Este manual también es adecuado para:

Flojet n5100020Flojet n5100040Flojet n5110040