Narex EVP 16 K-2 Instrucciones De Uso Originales página 12

English
Table of contents
Description of the device ..................................................................12
Technical Specification .....................................................................12
General Power Tool Safety Warnings .............................................12
Special Safety Instructions ...............................................................13
Information about noise level and vibrations ..............................13
Double insulation ..............................................................................13
Use .......................................................................................................13
Safety clutch.......................................................................................14
Commissioning and use ...................................................................14
Work instructions ..............................................................................14
Maintenance and service .................................................................14
Accessories..........................................................................................15
torage ..................................................................................................15
Environmental protection ................................................................15
Warranty .............................................................................................15
Certificate of Conformity ..................................................................15
Technical Specification
Model
Supply voltage (V)
Power frequency (Hz)
Power input (W)
Idle speed (rpm)
1st speed gear
2nd speed gear
Number of impacts (ipm)
1st speed gear
2nd speed gear
Maximum torque (Nm)
1st speed gear
2nd speed gear
Speed pre-selection
Safety clutch
Extent of chuck dia. (mm)
Thread on spindle
Drilling dia. max. (mm)
into steel
into wood
into concrete
Clamping neck dia. (mm)
Weight (kg)
Protection class
* Limited by safety clutch
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference!
The term "power tool" in the warnings refers to your mains-operat-
ed (corded) power tool or battery-operated (cordless) power tool.
12
Impact drill EVP 16 K-2
Original operating manual (EN)
EVP 16 K-2
230–240
50–60
1 050
0–970
0–1 750
0–19 400
0–35 000
35*
19.5*
ü
ü
3–16
5/8"-16UN-2A
16
55
full drill bit 30
annular bit 55
57
3.8
II /
Description of the device
1 .......Chuck with ring gear
2 .......Clamping neck
3 .......Latching pin
4a .....Switch / controller
4b .....Alteration switch lever
5 .......Speed pre-selection wheel
6 .......Air vents
7 .......Gear-shifting lever
8 .......Hammer gear button
9 .......Additional handle
10 .....Stop bar
11 .....Chuck hook
12 .....Spots on spindle
13 .....Socket screw wrench
14 .....Wing screw
15 .....Wing screw
16 .....Wing screw
Depicted or displayed accessories need not necessarily be-
come the integral part of delivery.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust. Pow-
er tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a pow-
er tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed