Dometic ACC3100D Instrucciones De Uso página 17

2. Dismantle the ADB center cover.
Fig.  on page 2
3. Disconnect the C1 socket to disconnect the power supply.
4. If present, disconnect the solar panel and the battery.
Fig.  on page
5. Dismantle the upper cover of the rooop unit.
Fig.  on page 3
6. Remove the outside air filters.
Fig.  on page 4
7. Insert new outside air filters.
Fig.  on page 4
8. Ensure that the interior walls and fan flaps are inserted correctly.
Fig.  on page 5
9. Remount the upper cover of the rooop unit.
Fig.  on page 5
10. If present, reconnect the solar panel cable (2) to the solar panel connection (C14).
Fig.  on page 6
Socket
1
2
3
C1
C14
C15
C16
11. Reconnect the 12 V connection cable (3) to the input power supply from the vehicle battery (C1).
12. Reconnect the battery cable (1) to the battery thermistor connection (C16) and the battery +/- connection
(C15).
13. Clip the ADB center cover to the interior cover.
Fig.  on page 6
14. Replace the ADB center cover.
15. Press the
button to switch the ventilation system on.
16. Press the
button for 3 s to reset the air filter status.
Interior air filter
1.
Press the button to switch the ventilation system off.
2. Dismantle the ADB center cover.
Fig.  on page 6
Description
Battery cable
Solar panel cable
12 V connection cable
Input power supply from the vehicle battery
Solar panel connection
Battery +/– connection
Battery thermistor connection
EN
17