Silvercrest SURQ 4 A2 Instrucciones De Uso página 19

7.7. Dimmer function
You can adjust the display brightness in three levels as follows:
Press the button repeatedly until you reach the desired brightness.
Press and hold the
does not appear until you operate the device again. If the device is not operated for
about 10 seconds, the display turns off again.
Press the button briefly to deactivate this function.
7.8. Setting the time/automatic dimming
When the device is switched on for the first time, the date and time are set using the radio
signal. The time can also be set manually. The automatic dimming of the display is also set
during this process:
In standby mode, press and hold the
Press the or
Press the or
Press the or
Press the or
Tuesday etc.)
Press to confirm.
AUTO DIM appears on the display. You can dim the display automatically for a specific
period of time.
Press the or
Press to confirm.
DIMSTART appears. Press the
start time and press
Press the or
confirm.
DIM ENDS appears. Press the
end time and press
Press the or
confirm.
If you do not press any button within 7 seconds, the device switches back to standby
mode.
In the menu, you can select whether the time and week day are to continue to
be set automatically using the radio signal. For more information, see "12. Set-
tings menu" on page 24, menu item SYSTEM/AUTO TIME SYNC
button for approximately 2 seconds. The display turns off and
buttons to select 12- or 24-hour format and press
buttons to set the required hour and press
buttons to set the required minutes and press
buttons to set the desired day of the week (D1 = Monday, D2 =
buttons to select ON or OFF.
or
to confirm.
buttons to set the desired minutes for the start time and press
or
to confirm.
buttons to set the desired minutes for the end time and press
button until 24 H flashes on the display.
buttons to set the desired hour for the dimmer
buttons to set the desired hour for the dimmer
to confirm.
to confirm.
to confirm.
to
to
English – 19