Descargar Imprimir esta página

Silvercrest SURQ 4 A2 Instrucciones De Uso página 28

Radiodespertador bluetooth

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 229
18. Possible faults
If the device stops working properly, please refer to the troubleshooting table shown be-
low to see if you can resolve the problem yourself.
Never attempt to repair the device yourself. If a repair is necessary, please contact our
Service Centre or a suitable authorised repair workshop.
Characteristic
There is no sound
during radio recep-
tion.
Radio reception is
disrupted.
No display or no
display lighting.
No sound during
playback via AUX
IN or Bluetooth.
The device does not
respond when the
buttons are pressed.
The
symbol flash-
es on the display, the
charging process is
not carried out.
19. Storing the device when not in use
If you do not intend to use the device over a longer period of time, store it in a cool, dry
place and make sure that it is protected from dust and extreme temperature fluctuations.
Remove the mains adapter from the mains socket.
28 – English
Cause
The volume is too low.
The radio station was ac-
cidentally changed.
Interference from electri-
cal devices.
The aerial is not aligned
properly.
The display has been fully
dimmed.
When the device is con-
nected via AUX IN or
Bluetooth: The volume of
the external device is too
low.
Electrostatic discharge is
present.
The mobile device is not
positioned correctly on the
charging pad.
There may be metal on the
charging pad.
Remedy
Increase the volume.
Reset the station.
Move the device to a different lo-
cation.
Re-align the aerial.
Press the
button to set a differ-
ent display brightness.
Increase the volume on the exter-
nal device.
Switch off the device.
Unplug the mains adapter from
the mains socket.
Realign the mobile device on the
charging pad to start the charg-
ing process.
Remove any foreign materials
from the charging pad.

Publicidad

loading