Silvercrest SURQ 4 A2 Instrucciones De Uso página 25

SYSTEM AUTO
TIME
SYNC
RESET
SW VER
13. Bluetooth
You can use Bluetooth
ers or mobile phones with Bluetooth
Press the button repeatedly until
13.1. Pairing Bluetooth
Enable the Bluetooth
the user manual for your audio playback device for more information. The name of the
DAB/FM clock radio is "SURQ 4 A2".
If you are prompted to enter a password on the external device, enter "0000" as the
password.
During the pairing process, PAIRING flashes on the display.
Pairing is complete once CONNECT appears on the display and an ascending acous-
tic signal sounds. The external device can now be used with the DAB/FM clock radio.
If you would like to end Bluetooth
device, use to change the source on the DAB/FM clock radio or press and hold the
button until pairing mode restarts. Upon disconnection, a descending acoustic sig-
nal sounds.
You can control how tracks are played, the volume and a range of special functions on
your external device and on the DAB/FM clock radio. What functions are available is de-
pendent on your external device and the software that you use.
Press the button to increase the volume, press the
Press the button to start or stop playback.
Press the button to skip back to the start of the track; press the button again within 3
seconds to return to the previous track.
Use the button to switch to the next track.
Choose whether or not the date and time are set automat-
ically.
UPDATE FROM ANY: set the time via DAB/FM
UPDATE FROM DAB: set the time via DAB
UPDATE FROM FM: set the time via FM
NO UPDATE: no automatic time setting
Reset to factory settings
YES: reset the device
NO: do not reset the device
Display of software version
®
mode
®
to play tracks wirelessly from external devices (such as MP3 play-
® ) on this device.
® devices
®
function on your external device and pair the devices. Refer to
® transmission, switch off Bluetooth
is shown on the display.
button to decrease the volume.
® on the external
English – 25