Publicidad
Idiomas disponibles
Idiomas disponibles
9. Setting the time-on/off (Regular boot):
After setting the time, press the
time and "hh:mm" flashing, press
minutes;
Press the
key again, until the "hh:mm" flashing, and
machine will be turned off when you go out. Press the
to add or subtract 30 minutes; Timing-on setting is completed during this period
Cancel the timing-on setting operation:
At this time, the timing switch time is adjusted to "hh:mm" to cancel the timing switch.
Time period temperature setting:
Press the
key after the timing power-on setting is completed, and set the temperature
flashing press
to adjust the required room temperature.
10. Setting the next period time-on/off:
After turning on, press the
key again until it display
will display
shutdown and the temperature during this period. The setting method is
the same as the previous time period setting.
Time-on,
Time-off,
period setting.
Note: "" (1234567) means to set every seven days a week. It is recommended that
the settings on the mobile phone APP can be easily completed.
9. Valve anti-lock function:
When the temperature control panel is turned off, the air-conditioning valve is
automatically opened every 100 hours, and the fan is turned off at the same time, and
the linkage switch is not closed.
This state lasts for 3 minutes, and automatically restores the previous output state after
3 minutes. In this way, the electric ball valve is not used for a long time and sometimes
the situation of stuck.
The specific operation is as follows:
After operating the fan control mode according to above, press
of the LCD display will display "AL1" or "AL0",
"AL1" means the valve anti-lock is on,
"AL0" Indicates that the valve is closed for anti-lock, which can be adjusted by
pressing
.
10. WIFI connection:
WIFI network connection: After installing the Tuya APP software, click Add Device. When
the thermostat is off, press and hold the
connecting the network.
See the distribution network diagram for details.
11.Advanced Setting Mode
In power-off state, press
and
to switch dIF, Sh1, Sl2, Sh2, Sl2, ADJ, FAN, FrE, LOC, ADD, FAC.
Display code
Function
dIF
Deadzone/hysteresis
Max temp in cooling
SH1
Min temp in cooling
SL1
Max temp in heating
SH2
Min temp in heating
SL2
Temp. Calibration
AdJ
Fan coil control mode
FAN
FrE
Anti-freeze function
Key lock(button lock)
LOC
Working state
Pon
memory function
Factory setting
FAC
key again until it displays
morning start
to adjust, each press to add or subtract 30
appears, it means the
to adjust, each press
to turn on. Then press
The setting method is the same as the previous time
again. The time area
button for 10 second,
meanwhile, to enter into Advanced Setting. Press
Parameters
0.5ºC;1ºC
10~40ºC
10~40ºC
10~40ºC
10~40ºC
-5~5ºC
0:fan coil in-control
1:fan coil out off control
0:Anti-freeze On
1:Anti-freeze Off
0:Unlock
1:All locked except
2:All button locked
When power fails suddenly,
working state memory or
not 00: no memory
01: memory
00: Factory reset
08:Just display
X. Phone Port Operation Instruction
1. Install APP on phone
1. Search Tuya Smart in the app store for the Android version, or search
Tuya Smart in the appstore for the iOS version Download the Tuya
smart app, open the app:
2. Connection Thermostat with Phone
Thermostat part Setting
Method 1:
After the equipment is powered on, check whether the equipment is
abnormal. Turn off the device, press and hold
enter the configuration state, and then click Next in the Tuya Smart
app
Method 2:
POWER OFF STATE
blinking, start
Press and hold
enter into Advanced Setting.
0:01
Factory default
1ºC
40ºC
After enter into Advanced Setting, press
10ºC
40ºC
10ºC
0ºC
fac
0
0
0
When
00
08
fac
Then, press
2
, then press
button the same time for 2 seconds, then will
28
ºC
ROOM
TEMP
22
ºC
SET TEMP
10 times until "FAC" appears.
28
ºC
ROOM
TEMP
08
FAC
appears, press
to change 08 to 10 or 32, make FAC=10 or FAC=32.
28
ºC
ROOM
TEMP
10
to power-off state.
for 10 seconds to
Step 1
Step 2
Step 3
Step 4
V.1
Publicidad
