Publicidad
Idiomas disponibles
Idiomas disponibles
PRIMEROS PASOS
Cord Wrap Installation - BXR HD Only
BXR HD features cord wrap storage that requires installation before
assembling the product.
CORD WRAP ASSEMBLY (BXR HD ONLY):
1. Locate the 2 cord wrap pieces and two screws.
2. Assemble the cord wrap pieces to the back of the unit:
- Line up the hole in the cord wrap piece with the hole on the unit.
- Assemble with provided screw.
- Take care to ensure the rounded edge of the cord wrap faces the
outside of the unit.
3. Repeat for remaining cord piece and screw.
22 Español
PRIMEROS PASOS
NOTE: Do not use in a window.
Your product can be used in either vertical or horizontal orientation and in multiple angles based on handle positioning:
HANDLE ASSEMBLY:
Match Handle (A) with Elbow (A) and insert into unit until it clicks. Repeat with Handle (B) and Elbow (B). Ensure handles are installed with
silicone feet on side of unit with silicone feet. Position unit in either vertical or horizontal orientation and rotate handles as needed to reach
desired unit angle.
B
ADVERTENCIA: No cuelgue el producto.
A
B
A
SILICONE FEET
23
Español
Publicidad
