Publicidad
Idiomas disponibles
Idiomas disponibles
Device upgrade
Select a space to install the refrigerator on a flat surface.
How to adjust the feet on t h e front of the product
Adjustment process :
d.
Turn the feet clockwise to raise the refrigerator.
e.
Turn the feet counter-clockwise to lower the refrigerator.
f.
Adjust the left and right feet as described above until the refrigerator is level.
Electrical connection
Warning!
power supply, so the plug must be easily accessible after installation.
•
The electrical installation must comply with current standards and be capable of
withstanding the maximum power indicated on the nameplate.
•
The socket-outlet must be easily accessible, but out of the reach of children.
•
For your safety, this appliance must be earthed. If the plug is not earthed, consult a
qualified electrician to connect your appliance in accordance with current regulations.
•
Do not use extension leads, adapters or multiple sockets.
•
Power strips or portable power supplies must not be positioned at the rear of the unit.
The manufacturer declines all responsibility if the above safety precautions are not
If
observed.
If the appliance is not level, the doors will not be correctly aligned
and the compartments may not be watertight.
To level the unit laterally, adjust the two adjustable feet on the front
of the product.
Once your appliance has been installed, make sure it is tilted
slightly backwards, to make it easier to close the door properly. If
necessary, adjust the adjustable feet.
It must be possible to disconnect the device from the main
in
doubt,
contact
your
Check
Lower
installer
.
Publicidad
