Publicidad
Idiomas disponibles
Idiomas disponibles
DE
DE
2.1 Vacuum packing using vacuum packing devices
EN
EN
Our CASO VacuBoxx Inox XL canisters can be vacuum packed with all commercially
IT
IT
available vacuum packing devices with a hose connector. For this, please also refer to the
operating instructions of your vacuum generator.
ES
ES
A suitable adapter (e.g. vacuum pump and adapter, item 1178), which can be placed on
the vacuum hose of the vacuum generator, or a hose incl. adapter (included in item 1177 /
NL
NL
1258), is also required. To do so, please connect the vacuum hose to the device and the
adapter to the vacuum canister valve.
RU
RU
FR
PT
SV
TR
Item 1258 or 1177
For an optimal vacuum, please make sure that all components are fi rmly attached
to the following points during the vacuuming process:
Hose connection on the vacuum generator, hose on the connection, connection on the
adapter, adapter on the valve on the container lid.
PLEASE NOTE
When using a chamber vacuum packing device, canisters only require 5 seconds to
become suffi ciently evacuated. Please abort the vacuum packing process early to en-
sure your canister is not damaged. Please proceed with caution to prevent damage!
2.2 Vacuuming with VacuOne Touch (Item 1169 / 1301)
and Vacu OneTouch Pro (Item 1333)
You can also vacuum the containers
with our electric hand vacuums
(Item 1169 / 1301 and 1333).
Fill the canister and leave 0,5 cm
free to the upper edge. Place the lid
on the canister. Lightly press down
the lid of the canister at the begin-
ning of the vacuum operation.
Place the device at the middle of
the valve on the canister lid and
press it down slightly. Press the ON/
OFF button of the device and air
will be withdrawn form the canister.
20
20
CASO VacuBoxx Inox XL
Item 1178
Item 1169 or 1301
Item 1333
Publicidad
