Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTION ___________________________
Use the HDMI (ARC) Socket
The ARC (Audio Return Channel) function allows
you to send audio from your ARC- compliant TV to
your sound bar through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use
your TV remote control to adjust the volume output
(VOL +/- and MUTE) of the sound bar.
• Connect the HDMI cable (not included) from
unit's HDMI (ARC) socket to the HDMI (ARC)
socket on your ARC compliant TV. Then press
the remote control to select HDMI ARC mode.
Tips:
• Your TV must support the HDMI-CEC and ARC
function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about ARC
function, please refer to the owner's manual.
• Only HDMI 1.4 or higher version cable can sup-
port the ARC function.
• Your TV digital sound output S/PDIF mode set-
ting must be PCM.
Use the OPTICAL Socket
• Remove the protective cap of the OPTICAL soc-
ket, then connect an OPTICAL cable (not inclu-
ded) to the TV's OPTICAL OUT socket and the
OPTICAL socket on the unit.
Use the COAXIAL Socket
• You also can use the COAXIAL cable (not inclu-
ded) to connect the TV's COAXIAL OUT socket
and COAXIAL socket on the unit.
• Tip: The unit may not be able to decode all di-
gital audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set
to PCM (Refer to the user manual of the input
source device for its audio setting details) with
HDMI / OPTICAL / COAXIAL input.
Use the AUX Socket
• Use a RCA to 3.5mm audio cable (not included)
to connect the TV's audio output sockets to the
AUX socket on the unit.
• Use a 3.5mm to 3.5mm audio cable (included)
to connect the TV's or external audio device he-
adphone socket to the AUX socket on the unit.
Connect Power
Risk of product damage!
• Ensure that the power supply voltage corres-
ponds to the voltage printed on the back or the
underside of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
• Connect the mains cable to the AC~ socket of
the main unit and then into a mains socket.
Note:
• If there is no power, ensure the power cord and
plug are fully inserted and the power is turned
on.
ENGLISH
15
Publicidad
