Descargar Imprimir esta página

VALBERG 14S44 C DXAD929C Instrucciones De Uso página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

B
WARNING
Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the
machine for any period of time, which may cause corrosion.
Please follow the steps below for adding dishwasher salt:
1.
Remove the lower basket and unscrew the reservoir cap.
2.
Place the end of the funnel (if supplied) into the hole and pour in about 1.5 kg of
dishwasher salt.
3.
Fill the salt container to its maximum limit with water, It is normal for a small amount
of water to come out of the salt container.
4.
After filling the container, screw back the cap tightly.
5.
The salt warning light will turn off after the salt container has been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing program should be
started (We suggest to use a short program). Otherwise the filter system, pump or other
important parts of the machine may be damaged by salty water. This is out of warranty.
Using the appliance
6
EN

Publicidad

loading

Este manual también es adecuado para:

14s44 c xad929c982767983751