Swann SWIFI-4KFLOCAM-EU Guia De Inicio Rapido página 10

box as marked. Make sure each wire is securely screwed to its corresponding terminal. Refer to
the Camera wiring colour code table on page 8 to make the correct connections.
8
Restore power at the circuit breaker.
9
When the camera powers up, the floodlights will turn on for a brief moment.
CAUTION: Floodlights are extremely bright. To avoid possible damage to your eyes, do not stare
directly at the floodlights when they are on.
10 Once you hear the camera say "Ready for pairing" and the LED indicator starts blinking blue
slowly, the camera is ready to be paired with your Wi-Fi network.
Wall-Mounted Example
TIP: If you have a light switch that controls the floodlight camera, remember not to turn off the switch
EN as this will also turn off the unit. The unit needs to be powered at all times to stay connected to
your Wi-Fi. Put a sticker label on the light switch so that people know not to turn it off.
10
INSTALLATION INSTRUCTIONS
Ceiling-Mounted Example