Swann SWIFI-4KFLOCAM-EU Guia De Inicio Rapido página 7

MOUNTING BRACKET INSTALLATION
MINIMUM 9CM CLEARANCE
• Ensure the bracket is mounted on a secure and stable surface
that can support the full weight of the floodlight camera.
• Allow enough clearance (minimum 9cm) around the bracket for
the floodlight camera to slide in and out. If installing on the
ceiling, ensure that the release tab is facing outward.
• If mounting on a masonry surface (such as brick or concrete)
or drywall, insert wall plugs before screwing the bracket to
the surface.
• If mounting on a wooden surface, screw the bracket directly
to the surface.
Note: Step-by-step installation instructions can be found on page 9
INSTALL THE CAMERA
Attaching the camera to the mounted bracket
rear view
EN
7