Swann SWIFI-4KFLOCAM-EU Guia De Inicio Rapido página 4

Wi-Fi Coverage Availability
• Before permanently mounting the floodlight camera, it is important to confirm the availability of
Wi-Fi and signal strength at the desired installation location.
• Please note that Wi-Fi quality can vary significantly at different locations around the home due
to environmental factors, such as home construction type and wireless interference from other
electronic devices.
Checking your Wi-Fi network coverage
1
Connect your phone to the 2.4GHz Wi-Fi network band of your internet/broadband router.
Note: The camera can connect to a 2.4GHz network only.
2 Bring your phone to the desired installation location for the floodlight camera. If your phone has
a Wi-Fi connection, the floodlight camera will likely be able to obtain a Wi-Fi connection as well.
Check the Wi-Fi signal strength status icon at the top of your phone screen. We recommend a
minimum of two bars, as shown below. Further testing should be performed if the Wi-Fi signal
strength is only a single bar.
X
0
No connection
3
To avoid potential Wi-Fi connection issues later on, try playing a video through a media streaming
EN
service app, such as YouTube
4
GET STARTED
!
1 2
Poor Fair Good
or Netflix
™ ™
Wi-Fi signal strength icon
3 4
Excellent
, on your phone. If possible, temporarily pause all online