Cleaning
5 Cleaning
Cleaning Headphones,
Microphone, Connecting
Cable
NOTE
Windscreens W 44, W HSD
NOTE
30
1)
Disconnect the headphone and microphone cables from the mixer.
2)
Use a cloth moistened (not wet!) with water to clean the surfaces of the
equipment.
Never use caustic or scouring cleaners or cleaning agents containing alcohol or
solvents since these may damage the enamel or plastic parts
1)
Remove the windscreen from the microphone.
To avoid damaging the windscreen fixed on the microphone, be extremely
careful in removing the W HSD from the HSD 171/271 microphone!
2)
Wash the windscreen in soap suds.
3)
Allow the windscreen to dry overnight.
4)
Slide the windscreen onto the microphone capsule.
5)
Pull the windscreen over the outer edge of the microphone capsule.
HSC 171 HSC 271 HSD 171 HSD 271