Publicidad
Idiomas disponibles
Idiomas disponibles
HAND MIXER ATTACHMENT ASSEMBLY
(accessories vary by model)
IMPORTANT:
• Review all warnings before proceeding
• The hand mixer attachment is NOT dishwasher safe.
1
Install the hand mixer attachment to the power base by
aligning the arrow on the power base with the arrow on
the mixer attachment. Then, push the power base onto
the attachment to lock into place.
COLLAR
3
Plug the unit in and power on. The unit will begin mixing on speed 1. Use the speed selector to
increase or decrease speed.
Use speeds 1–2 when combining dry ingredients, such as flour, into liquid
Speeds 1 & 2
ingredients and when making thicker doughs, such as bread doughs.
Use speeds 3–4 when making cookie doughs, batters, quick breads, frostings,
Speeds 3 & 4
and most other recipes.
Speed 5
Use speed 5 for whipping cream, mousse, or egg whites.
NOTE: Start on speed 1, then slowly ramp up to prevent ingredients from splattering.
5
To remove the power base from the hand mixer attachment,
first press the power button to turn the unit off, then unplug
the unit. Press and hold the release buttons on either side of
the power base to remove the mixer attachment.
6 Refer to the Care & Maintenance section for cleaning and
storage instructions.
ninjakitchen.com
2
Attach both beaters, dough hooks, or the whisk
using the accessory slots on the mixer head.
Insert the beater or dough hook with the collar
into the slot with the diagram showing a collar.
The whisk can be inserted into either slot. You
will hear a slight click when locked in place.
4 Press
to turn the unit off. To remove the
beaters or other accessories, press the eject
button. Ensure the beaters or other accessories
come to a complete stop before pressing the
eject button.
IMMERSION BLENDER ATTACHMENT ASSEMBLY
(accessories vary by model)
IMPORTANT: Review all warnings before proceeding
NOTE: When blending in a cooking pot on a stovetop, remove the pan from the heating element or
ensure the heating element is turned OFF prior to blending to reduce the risk of burns.
1
Install the immersion blender attachment
to the power base by aligning the arrow
on the power base with the arrow on the
immersion blender attachment. Then, push
the power base onto the attachment to
lock into place. Plug the unit in.
2
Prior to blending, make sure to use a container large
enough to fully submerge the blender head in ingredients.
Once submerged, there should be ample room in the
container to avoid overflowing and splashing. A cooking
pot, large measuring container, or the blending vessel
(not available with all models) is recommended.
3
Submerge the vents of the blender head in the
ingredients. Press and hold the
while using
an up-and-down motion to blend, making
sure to stop blending anytime the vents are no
longer submerged. While continuously holding
to blend, press and hold the TURBO button to
ramp up to high speed.
Use to blend liquids, such as mayo or
LOW
dressing, or soups and sauces with soft
ingredients, such as tomato sauce.
Use for tougher ingredients, such
TURBO
as butternut squash, or for smooth
purees, such as hummus.
4 To remove the power base from the immersion
blender attachment, first unplug the unit. Press
and hold the release buttons on either side of
the power base to remove the immersion
blender attachment.
5
Refer to the Care & Maintenance section for
cleaning and storage instructions.
ninjakitchen.com
Publicidad
