Publicidad
Idiomas disponibles
Idiomas disponibles
3. ASSEMBLY
Assembly steps:
1. Place the mop head in the low body by assembling it in place.
2. Install the metal tube in the low body until it is assembled in the correct place.
3. Install the water tank on the body.
4. OPERATION
330 ml removable water tank
The water tank is in the low body. It is recommended to use distilled or demineralised water
instead of tap water. Otherwise, limescale deposits may form. Fig. 3
Note:
-
Turn the steam cleaner off when removing the water tank.
-
Fill the water tank with the water measuring cup.
-
Do not use chemical products on the water tank of the steam cleaner.
-
It is recommended to remove limescale deposits at least once a month.
Steam level control
-
The steam level indicator light will stop flashing when the steam cleaner is ready to be
used.
-
Next, press the steam level button to choose the desired steam level: low, medium, or
high.
Fig. 4
Note:
Press the power switch and then the steam control button.
Consider that, when pressing the steam level button for the first time, steam will be in the
maximum level. Set the desired level by pressing the steam control button.
Reusable mop cloths
The reusable mop cloths are machine-washable and suitable for use on virtually all hard
floor surfaces. Your steam cleaner includes two pads. The grey and white striped pads are
used for scrubbing heavily soiled floors and cleaning stubborn debris. Fig. 5
Steam cleaner preparation
Fig. 6.
1. Place the pad on the mop head. Make sure that the quick release tab is behind.
2. Fill up the water tank.
ENGLISH
HYDROSTEAM 3030 ACTIVE
39
Publicidad
