cecotec HYDROSTEAM 3030 ACTIVE Manual De Instrucciones página 41

Sliding carpet
This accessory is installed in the mop head to allow the device to slide over carpets while
cleaning them.
Please note
- Make sure the sliding carpet is properly assembled in the mop head. If it is not in the
correct position, the sliding carpet will fall during the use of the steam cleaner.
- Move the steam cleaner continuously until it is finished. Do not leave the steam cleaner in
a steady position.
5. CLEANING AND MAINTENANCE
- Disconnect the power cord from the plug.
- Carefully remove the pad from the mop head. The pad can be hot.
- The remaining water in the water tank must be emptied before storing the device.
- The pad is machine-washable with hot water. Use only liquid detergents. For better
results, do not use softeners nor bleach. Allow the mop to dry.
- Wind the power cord in the hook in the back of the steam cleaner.
- Clean every steam cleaner surface with a soft cloth. Store the device in a protected and
dry area vertically.
- It is recommended to remove calcium in the water tank at least once a month, as well as
using a descaling agent for steam cleaners.
6. TROUBLESHOOTING
Warning:
To reduce the risk of electric shock, turn off the device and unplug it before carrying out any
maintenance or troubleshooting tasks.
Common problems
Problem
Poor or no steam
Possible cause
Empty water tank indicator
light.
Steam level not selected.
ENGLISH
Solution
Turn off the steam cleaner
and fill the water tank
Select the steam level with
the button.
HYDROSTEAM 3030 ACTIVE
41