The Machine And Its Parts; Technical Data; Closing Possibilities; Dimensions - Renz ECL360 Instrucciones De Servicio

2

The machine and its parts

1. handle for transportation
2. clamping lever for parallel adjustment
3. socket for power supply
4. main switch
5. knob for parallel adjustment
6. knob for diameter setting
7. foot pedal
8. comb for fixing the RingWire
9. book support table
10. clamping knob for diameter setting
11. safety guard (not visible in the sketch)
12. closing angle
The above mentioned pictures shows an ECL360 and represents also ECL500 and ECL700. They
are only different in the max. binding length (see technical information below).
Information
3

Technical Data

Voltage:
Frequency:
Power
consumption:
Protection:
Fuse:
4

Closing possibilities

RENZ RING WIRE
maximum binding width:
5

Dimensions

Länge:
Breite:
Höhe:
6

Weight

netto:
®
element
ECL360
230V 1ph. (115V 1ph.on request)
50Hz (60Hz on request)
0,1 kW (at 230V)
0,16 kW (at 115V)
IP 30
230 V / 2 A T
115 V / 4 AT
ECL360
®
diameter: 3/16" - 1 1/2"
Teilung: 4:1, 3:1 and 2:1
360 mm (14,17")
ECL360
53 cm (21")
52 cm (20,5")
23 cm (9,1")
ECL360
38 kg
ECL500
230V 1ph. (115V 1ph. on request)
50Hz (60Hz on request)
0,1 kW (at 230V)
0,16 kW (at 115V)
IP 30
230 V / 2 AT
115 V / 4 AT
ECL500
3/16" - 1 1/2"
4:1, 3:1 and 2:1
500 mm (19,68")
ECL500
53 cm (21")
65 cm (25,6")
23 cm (9,1")
ECL500
46 kg
10
ECL700
230V 1ph. (115V 1ph.on request)
50Hz (60Hz on request)
0,1 kW (at 230V)
0,16 kW (at 115V)
IP 30
230 V / 2 AT
115 V / 4 AT
ECL700
3/16" - 1 1/2"
4:1, 3:1 and 2:1
700 mm (27,56")
ECL700
53 cm (21")
85 cm (33,5")
23 cm (9,1")
ECL700
56 kg