Descargar Imprimir esta página

Maytag Performa MD2300 Guia Del Usuario página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

Before
You Call
Check
the
following
if your
clothes
dryer...
Doesn't
Run
Be sure the door is shut.
° Is the electrical cord plugged
in?
Has a fuse blown or the circuit breaker tripped?
Push the Start button
again if the door was opened during
the cycle.
Doesn,t Heat
cirCuit breaker
tripped?
Select a heat sett_g;
not air fluff:
Check that the gas supply
is on for gas dryers
clean
the lint filter and exhaust
duct:
Dryer timer ma
Rave moved
into the €ool-down
portion
of the cycle
y
Doesn't Dry Properly
Check all of the above, plus...
Check the exhaust
hood outside the house, does it open and close freely?
Check exhaust
system for lint build-up.
Ducting should be inspected
and cleaned
annually.
Clean the lint filter and exhaust
duct.
Use rigid 4" metal exhaust
duct.
Do not overload.
1 wash load -- 1 dryer load.
Sort heavy items from lightweight
items.
Large, bulky items like blankets
or comforters
may require repositioning
to ensure even drying.
Check the washer
to be sure it is draining
properly
to extract water from the load.
Clothes load is too small to tumble properly.
Add a few towels
is Noisy{il
¸¸¸!7¸¸¸¸¸ i
i
Check the load for objects such as coins, nails, etc. Remove promptly
from dryer.
• I!iS
norma! to hear tl_e dryer g_S vai_e or heating
element
cyc!e on and off during
the drying
cycle.
The dryer shOUld be level and installed
on a solid floor:
Be Sure _he rubber feet are instalied
on the leVeling legs.
A cticking n0ise may be the timer adVanCing,
It is normal
for the dryer to hum due to the high velocity
of air moving
through
the dryer drum and
exhaust
System.
Control
Knob Advances
Slowly
This is normal
operation
for an Auto Dry cycle, especially at the beginning
of cycle. Once the load begins
to dry, the control knob will start to advance.
The rate of advancement
will be slow at the beginning
of
the cycle because
there is more moisture
in the load. As the load becomes
more dry, the control knob
will advance
more quickly.
i
Dries Unevenly
Seams, pockets
and other similar heavy areas may not be completely
dry when the rest of the load has
reache_
the selected dryneSs level: This is normal. SeleCt the
IVIore Dry
setting if desired.
• If one h6avy item is dried with a lightweight
load, such as one towel with sheets, it is possible that the
heavy item Will not be Completely
dry when the rest of the load has reached
the selected dryness
level.
Sort heavy
items from lightweight
items for best drying
results.
Has an Odor
Household
odors such as from painting,
varnishing,
strong cleaners, etc. may enter the dryer with the
surrounding
room air. This is normal as the dryer draws the air from the room, heats it, pulls it through
the tumbler
and exhausts
it to the outside.
When these odors are present
in the air, ventilate
the room
completely
before using the dryer.
For further
assistance
contact
Maytag
Appliances
Sales
Company,
Maytag
Customer
Assistance:
U.S. 1-800-688-9900
or Canada
1-800-688-2002
U.S. customers
using
TTY for deaf, hearing
impaired
or speech
impaired,
call 1-800-688-2080.
7

Publicidad

loading

Este manual también es adecuado para:

Performa md2500