Publicidad
Idiomas disponibles
Idiomas disponibles
EN
54
Touch the control for the heating zone selection and
the indicator next to the button will flash.
Set a power level by touching the control and
sliding your finger in the [-] or [+] direction.
• If you do not set the power within 1 minute, the
induction hob will switch off automatically. You
will then have to start over from step 1.
• You can change the power setting at any time
during cooking.
• If you slide your finger along the slider in the [-]
or [+] direction, the power will vary from level
1 to level 9.
The symbol
will flash alternately with the temperature setting on the
control panel. This means that:
• You have not placed the pot correctly on the hob or,
• the pot you are using is not suitable for induction or,
• the pot is too small or is not in the centre of the hob.
There will be no heating if there is not a suitable saucepan on the hob. The control panel
will switch off automatically after one minute if no suitable pot is placed on the hob.
Publicidad
