After using the pressure washer wait at least 1
hour to cool down the machine before storage.
Follow the instructions for a compact storage.
STEP 1:
Remove knobs and bolts from handle and store
in a safe place.
STEP 2:
Remove handle from frame and align in storage
tubes as indicated.
It is highly recommended to use Kärcher's
Pump Guard (part number 9.558-998.0 sold
separately) before winter storage and during
the cleaning season to protect the pump from
freezing and premature wear.
STEP 1:
Move engine ON/OFF switch to OFF position.
STEP 2:
Disconnect all hoses.
STEP 3:
Unscrew cap from Pump Guard bottle.
STEP 4:
Remove internal seal.
STEP 5:
Reattach cap to Pump Guard bottle and
remove black protective cap.
WINTERIZING AND LONG-TERM STORAGE
STORAGE
STEP 3:
Insert handle in storage tubes.
STEP 6:
Screw bottle into water inlet on pressure
washer pump and squeeze.
STEP 7:
Pull starter handle until fluid starts to exit the
pump's high pressure outlet.
STEP 8:
Unscrew bottle. Store or dispose properly
CAUTION
Failure to follow the above directions may
result in damage to the pump assembly and
accessories and void the warranty.
.
13