Publicidad
Idiomas disponibles
Idiomas disponibles
5. (DS) DISPLAY CHANGE
This mode allows you to view the Atomizer/Cartomizer ohms measurement, battery
voltage, and your atomizer/cartomizer output voltage. This feature is useful if you want
to double-check which type of atomizer/cartomizer you have installed, as well as the
atomizer/cartomizer voltage when the battery is working.
The factory default setting is OFF.
1.
Press the button 7 times in a row until "5.Ds" is shown on the display.
2.
When Ds is shown on the display, you can choose between Do (for atomizer/cartomizer
3.
output voltage), Du (for battery voltage), or Dr (for atomizer/cartomizer resistance).
This will display a range from 2.9-2.2 Volts.
Voltage will be displayed for 2 seconds before turning off.
4.
NOTE:
It is normal for your atomizer/cartomizer to activate at a very low voltage while in
Ohms mode. This allows the Rebel to check the resistance.
Publicidad
