Vaporfi REBEL Manual Del Usuario página 9

4. (UC) CHECK THE BATTERY VOLTAGE
This mode allows you to check the voltage level of the battery.
Press the button 6 times in a row until "4.Uc" is shown on the display.
1.
When UC is shown on the display, leave the button idle for 2 seconds.
2.
The display will show the current battery voltage measurement (range between 3.2-8.4)
3.
for 2 seconds before turning off.
NOTE:
It is normal for your atomizer/cartomizer to activate at a very low voltage while in
battery check mode.
07