Vaporfi REBEL Manual Del Usuario página 13

8. (NR) MEAN & RMS
This mode allows you to switch between RMS and Mean Value Voltage monitoring. The
RMS mode is more accurate because it samples the output Voltage repeatedly while it is
powering an atomizer or cartomizer. It is with these measurements that it is able to adjust
for heat related Voltage drift.
Default setting is RMS. Press the button 10 times in a row until "8.NR" is shown on the
1.
display.
RMS (More accurate and preferred) will be shown as "ANS" on the display. MEA (a
2.
"hotter" older method used by prior models), will be shown as "NEA" on the display.
When you have reached your preferred setting, leave the button idle for 2 seconds.
3.
The setting will be locked in and the Rebel will resume normal operation.