3. (SO) ON/OFF & STANDBY MODE
The Rebel has 2 modes of operation—On or Standby/Off. Standby/Off mode will disable
the atomizer/cartomizer and the adjustment settings even if the button is depressed.
This mode is convenient for storing in a bag or pocket, where it otherwise could be
accidentally turned on.
The factory default setting is ON. To change to OFF/Standby, press the button 5 times
1.
in a row until "3.So" is shown on the display.
When "So" is shown on the display, leave the button idle for 2 seconds and the display
2.
will then show the last setting selected "On" or "Of"
The device will toggle between On or Of each time the button is depressed.
3.
Once you have reached your desired setting, leave the button idle for 2 seconds to lock
4.
in your selection. If you have selected "Of" the Rebel will go into Standby mode.
To turn the device back on and access the menu function, depress the button 5 times in a
5.
row or simply remove the battery and re-insert.