Vaporfi REBEL Manual Del Usuario página 7

2. (UD) ADJUSTING THE VOLTAGE DOWN
ADJUST VOLTAGE DOWN
This mode allows you to turn the voltage down without having to click through an entire
rotation before reaching a lower voltage setting.
Press the button 4 times until "2.Ud" is shown on the display.
1.
When "Ud" is shown on the display, leave the button idle for 2 seconds.
2.
The display will now show the current voltage setting. To adjust, simply depress the
3.
button to advance to the next lowest voltage setting (6.0, 5.9, 5.8, 5.7, etc.). After you
reach 3.0, the Rebel will reset back to 6.0 volts.
Once you have reached your desired voltage level, leave the button idle for 2 seconds to
4.
lock in your selection, and resume to normal operation.
NOTE:
If you are unhappy with your selection, simply press the button 4 times to
make another change.
05