THOMSON MIC120BT Manual De Instrucciones página 21

Operation
Press the POWER button to turn the device ON or OFF.
Adjusting the volume with the remote control
Press the Volume + button to increase the volume and the Volume - button to reduce the
volume.
Check the screen display, which should confirm the volume adjustment.
Mute function
Press the (mute) button on the remote control. The volume is muted and the word "Mute"
appears on the LCD screen. Press this button again to cancel the mute function.
Setting the clock (in standby mode)
1. Press SOURCE once to "SET CLOCK", press
2. Press or
3. Press or
4. Press or
5. Press ▷ to save the time setting.
Setting the alarm (in standby mode)
1. Once you have set the clock, you can set the alarm.
2. "Alarm Setup" is displayed. Press the
3. Press or
4. Press or
5. Press or
6. Press or
7. Press or
60 minutes. Press
8. Press or
to choose the 24 or 12hr format, then press
to set the current time, press
to set the current minutes, press
to set the current time, press
to set the current minutes and press
to adjust the alarm volume.
to select the alarm source (buzzer, FM, CD, USB) and press
to adjust the alarm duration. You can choose between 15, 30, 45 and
to confirm.
to save the alarm settings.
to confirm and the "24H" symbol will flash.
to confirm and the minutes will flash.
to confirm, and "SAVE YES" will flash.
button to make your choice.
to confirm. The minutes start flashing.
to confirm.
- EN 21 -
to confirm.
.