Remaining capacity
The active temperature button flashes red
when the remaining capacity falls below 30%.
BATTERY capacity empty or fault
The button lights up red for 3 seconds and
then goes out.
Maintenance and care
WARNING!
Before working on the tool, remove the
battery.
NOTE
The device requires zero maintenance.
Cleaning
WARNING!
Do not use water or liquid detergents.
Conductive parts coming into contact with
water can lead to electric shock, burns or
death.
Only clean the device in dry conditions.
Clean the device with a lightly dampened
cloth. Do not use detergent.
Repairs
Repairs may only be carried out by an
authorised customer service centre.
Spare parts and accessories
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com
16
Disposal information
WARNING!
End-of-life power tools must be rendered
inoperable before disposal.
For mains-operated power tools,
–
remove the mains cable.
For battery-operated power tools,
–
remove the battery.
EU countries only
Do not dispose of electric power tools
in the household waste!
In accordance with European directive
2012/19/EC on Waste Electrical and
Electronic Equipment and its incorporation
into national law, end-of-life power tools
must be collected separately and recycled
in an environmentally-friendly manner.
Recycling raw materials instead of
waste disposal.
The device, accessories and packaging
should be recycled in an environmentally-
friendly manner. Plastic parts are identified
for recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open end-of-life
batteries.
EU countries only: In accordance with
directive 2006/66/EC, defective or used
batteries must be recycled.
NOTE
Please ask your dealer about disposal
options.
Exemption from liability
The manufacturer and its agent are not liable
for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product. The manufacturer
and its agent are not liable for any damage
which was caused by improper use of
the power tool or by use of the power tool with
products from other manufacturers.
GG 200 18