Publicidad
Idiomas disponibles
Idiomas disponibles
How To Use
Start Cooking
1. Touch the ON/OFF control for one second.
After power on, the buzzer beeps once, all
displays show "–" or "– –", indicating that the
induction hob has entered the state of standby
mode.
3. Touching the heating zone selection control,
and the indicator next to the key will flash.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display "
" will automatically disappear after 1 minute if no suitable pan is placed on it.
alternately with the heat setting
18
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the
surface of the cooking zone are clean and
dry.
2. Select a heat setting by touching the Slide
control.
• If you don't choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
Power down
Power up
Publicidad
