Descargar Imprimir esta página

Qilive Q.1108 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
13. Before plugging into mains socket, check whether supply line voltage and current
EN
rating are in compliance with the rated electrical parameters shown on the rating
label.
14. To prevent damage to the mains cord, do not let it pass over sharp corners, edges
or hot surfaces.
15. If the supply cord is damaged, do not use. Check before each use!
16. If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
17. Only use attachments/accessories specified by the manufacturer.
18. Unplug this appliance during lightning storms or when unused for long periods of
time.
19. Do not place any sources of danger on the appliance (e.g. liquid filled objects,
lighted candles).
1.1. BATTERIES
1.
Remove batteries if exhausted or if they will not be used for a long period.
2.
The incorrect use of batteries can cause electrolyte leakage and will corrode the
compartment or cause the batteries to burst. Therefore,
Do not mix battery types, e.g. alkaline with zinc carbonate.
When inserting new batteries, replace all batteries at the same time.
3.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
4.
Keep new and used batteries away from children. If the battery compartment does
not close securely, stop using the product and keep it away from children.
5.
Batteries contain chemical substances, so they should be disposed of properly.
1.2. DISPOSAL
The marking of this device (symbol of a crossed-out dustbin) complies with
European Directive 2012/19/EU relating to "used electrical and electronic
equipment". This marking means that this equipment, at the end of its useful
life, cannot be disposed of with other household waste. The user is required to
deliver it to operators who collect used electrical and electronic equipment.
Collection operators, including local collection points, shops and local
authorities, create an appropriate system for collecting equipment. Appropriate
collection of used electrical and electronic equipment helps avoid harmful impacts on
human health and the environment, resulting from the presence of hazardous
components, as well as from improper storage and treatment of this equipment.
2. TECHNICAL SPECIFICATIONS
Power supply
Output power (max)
Bluetooth version
Bluetooth transmission frequency
Bluetooth transmission power
Operating temperature
Storage temperature
Dimensions (L x W x H)
Net weight
100-240 V~, 50/60 Hz
60 W
5.3
2402 MHz - 2480 MHz
Max. -2.69 dBm
0 - 40 ºC
-10 - 45 ºC
880 x 115 x 65 mm
2900 g
6

Publicidad

loading