Publicidad
Idiomas disponibles
Idiomas disponibles
6.7. ARC (AUDIO RETURN CHANNEL)
ARC is audio return channel function, it is used in digital audio output of LCD television
in order to get the optimal synchronous sound quality.
1.
Use the HDMI cable (not supplied) to connect the HDMI ARC input port of this
soundbar to the ARC output port of the LCD television.
2.
repeatedly to switch to HDMI ARC mode. The indicator light will keep
Press
solid purple when devices are correctly connected.
6.8. BLUETOOTH OPERATION
The soundbar plays music files from a Bluetooth source such as a mobile phone. This
can be music streaming sources such as Spotify, Apple Music, Youtube or music stored
directly on your phone.
1.
Enable Bluetooth of the soundbar.
■ When the soundbar is switched on, press
soundbar) to enable Bluetooth; or
■ Press
repeatedly to switch to Bluetooth mode.
The blue indicator light will be flashing quickly, which indicates the soundbar is in
Bluetooth searching status.
2.
On your mobile phone, go to Bluetooth settings and search for the Bluetooth
device. From the device list, select "Q1108" to connect. Input 0000 if a password
is required.
3.
Once paired, the indicator light will turn to solid blue, and you are ready to play
music on your phone.
4.
To disconnect Bluetooth, disconnect the device from your phone or switch the
soundbar to other modes.
Notes:
The range of the Bluetooth connection is 10 meters.
•
During playback, you can use the volume controls or playback control buttons on
•
the remote control or your phone.
Next time when you switch the soundbar to Bluetooth mode, both devices will
•
automatically connect.
6.9. USB OPERATION
Play MP3 music files via a USB flash drive.
1.
Insert a USB flash drive (FAT32 format) into the USB port on the rear panel.
2.
repeatedly to switch to USB mode.
Press
3.
The soundbar will start playing the MP3 track automatically from the connected
USB drive and the indicator light will keep solid cyan.
■ Press
on the remote control to pause or resume playback.
■ Press
/
to skip to the previous or next track.
6.10.
CHOOSING A SOUND EFFECT
Using the buttons on the remote control, you can choose 3 different sound effects to
best suit the audio you are playing.
button to activate movie sound effect (the indicator light blinks green
•
Press
for about 3 s).
button to activate music sound effect (the indicator light blinks white
•
Press
for about 3 s).
button to activate news sound effect (the indicator light blinks red for
•
Press
about 3 s).
on the remote control (or
9
EN
Publicidad
