Publicidad
Idiomas disponibles
Idiomas disponibles
About the Controls on the Air Conditioner
Controls
2
OPERATION
• To turn the air conditioner ON, push the
OFF/ON button.
To turn the air conditioner OFF, push the
button again.
• This button takes priority over any other
buttons.
• When you first turn it on, the air conditioner is
on the High cool mode and the temperature is
set at 72°F (22°C)
MODE
• Every time you push this button, it will toggle
between COOL, ECONOMY, FAN and DRY.
ON/OFF TIMER
• Every time you push the TIMER button, timer
is set as follows. (1Hour ¡ 2Hours ¡ 3Hours
¡ 4Hours ¡ 5Hours 6Hours ¡ 7Hours ¡
8Hours ¡ 9Hours ¡ 10Hours 11Hours ¡
12Hours ¡ 0Hour)
• The Setting Temperature will be raised by 2°F
(1˚C) 30 min. later and by 2°F (1˚C) after
another 30 min.
FAN SPEED
• Every time you push this button it is set as
follows. {High(F3) ¡ Low(F1) ¡ Med(F2) ¡
High(F3)...}.
4
5
6
TEMPERATURE SETTING
• This button can automatically control the
temperature of the room. The temperature
can be set within a range of 60°F to 86°F by
2°F.(16˚C to 30˚C by 1˚C) Select a lower
number for a lower temperature in the room.
AIR SWING
• This button can automatically control the air
flow direction.
REMOTE CONTROL SIGNAL RECEIVER
DRY
• When this unit is in dry mode, the fan rotates
in low speed. The fan stops when the
compressor stops cooling.
Approximately every 3 minutes the fan will
turn on and the unit checks the room air
temperature to set itself.
5
3
7
1
Publicidad
